The principal law governing product safety in Australia is the Australian Consumer Law, which codifies a single set of consumer protection laws for the whole of Australia, including but not limited to laws relating to product safety and product liability.
The Australian Consumer Law is Schedule 2 to the federal Competition and Consumer Act 2010 (Cth). However, its operation across Australia also depends on state laws, which provide that it has effect as a law of each Australian state.
In addition to the Australian Consumer Law, there are a number of specific types of products that have their own safety regimes. For example, gas and electrical safety continues to be regulated at a state and territory level, so that each Australian jurisdiction has its own gas and electrical safety legislation, which applies to gas and electrical appliances. Other areas, such as therapeutic goods (ie, medicines and medical devices), food, agricultural and veterinary products, genetically modified organisms and industrial chemicals (including cosmetics), have their own federal safety regimes (pursuant to the Therapeutic Goods Act1989 (Cth)), the Australia New Zealand Food Standards Code, the Agricultural and Veterinary Chemicals Act1994 (Cth), the Gene Technology Act2000 (Cth) and the Industrial Chemicals (Notification and Assessment) Act1989 (Cth), respectively).
In each case, these regimes do not prevent the products in question from being subject to the Australian Consumer Law, subject to certain limited carve-outs.
In addition to these statutory obligations, product manufacturers and suppliers are subject to obligations under the common law. In particular, persons who are injured by a product may have a right to sue the supplier of the product in negligence (as well as under statutory causes of action created by the Australian Consumer Law), and an analysis of a supplier’s duty to users of their product in negligence will often be important in assessing the appropriate response to a potential product safety risk.
The principal Australian product safety regulator is the Australian Competition and Consumer Commission (ACCC), which is responsible for administering the Competition and Consumer Act2010 (Cth), including the Australian Consumer Law.
The ACCC has regulatory, investigatory and prosecutorial powers granted to it under the Act. In relation to product safety, those powers include the power to require the production of documents or the provision of information, including the power to examine witnesses and to enter premises, conduct searches and seize consumer goods, equipment and documents. Typically, the powers of entry, search and seizure must be exercised pursuant to a warrant, unless there are circumstances which require their exercise without delay in order to protect life or public safety.
The ACCC also has powers to take a range of actions to protect consumer safety, including issuing substantiation notices and product safety notices, prohibiting the making of certain representations in relation to a consumer product and commencing compulsory recall actions. Finally, the ACCC can issue penalty notices for breach of the Australian Consumer Law, or commence proceedings seeking declaratory and injunctive relief as well as civil penalties. It may also refer certain breaches of the Australian Consumer Law to the Commonwealth Director of Public Prosecution for consideration of criminal prosecution.
In addition to the federal regulator, each state and territory has a Department of Fair Trading, or similar, although the role of these entities in relation to product safety has diminished following the commencement of the Australian Consumer Law in 2011. Each state also has offices responsible for safety issues relating to gas, electricity and home building products, which may be part of Fair Trading or may be separate.
The other important sector-specific regulators are:
The TGA, APVMA, OGTR and NICNAS each operate registration or licensing regimes that require certain products to be assessed and registered before they may be supplied or used in Australia. These regulators otherwise have various investigatory, regulatory and enforcement powers, the precise scope of which varies from regulator to regulator, but which are generally similar in scope to the ACCC’s powers in relation to consumer goods, tailored to the particular products in question. Subject to certain carve-outs, the regimes are not exclusive, so that a product that falls, for example, within the TGA’s remit may also be, in some or all circumstances, a consumer product that is regulated by the ACCC.
The powers of the ACCC and certain other regulators summarised above include powers to compel suppliers to take certain actions in relation to goods. For example, the ACCC may order a compulsory recall, issue an interim or permanent ban on the supply of specified products, or create an information standard in relation to particular products.
Outside situations where the ACCC has created a specific obligation in relation to particular goods, Australian law does not create specific obligations to take corrective action generally in relation to consumer goods.
However, the concept of product recall is well recognised under Australian law as covering a range of corrective actions in relation to products in the marketplace. The analysis of whether a recall is necessary in respect of a particular product safety issue is typically conducted by reference to the standards established by the tort of negligence. That is, what are the reasonable steps required of the supplier as a result of a foreseeable risk of injury to users of the product?
If a supplier initiates a recall action, there are no specific legal requirements for such actions. However, the various regulators (in particular the ACCC, the TGA, FSANZ and the electrical safety regulators) publish guidelines in relation to the conduct of recalls. As a result of those guidelines, there is a commonly expected format for recall notices in Australia, which involves a template structure as well as a red hatched border with a red triangle in the upper left hand corner of the notice.
There are two notification obligations in relation to consumer goods in Australia:
Notification pursuant to section 131 is also typically undertaken by way of an online form available on the ACCC’s recalls website.
Under the Australian Consumer Law, the maximum pecuniary penalties that may be imposed for breach of product safety obligations generally are, in the case of a corporation:
The maximum penalty that may be imposed on an individual is a fine of AUD500,000.
In either case, the pecuniary penalties identified above can be sought in either a criminal prosecution or a civil penalty proceeding.
The fines outlined above are the maximum fines payable in respect of breaches of substantive provisions of the Australian Consumer Law. There are some breaches that may attract lesser penalties – for example, the maximum penalties for breach of the notification obligations outlined under 1.4 Obligations to Notify Regulatory Authorities are AUD16,650 for a corporation and AUD3,330 for an individual.
In addition to the criminal and civil penalty regimes outlined above, the ACCC also has the power pursuant to section 134A of the Competition and Consumer Act to issue infringement notices in respect of certain breaches of the Australian Consumer Law. The ACCC may issue an infringement notice if it has reasonable grounds to believe that a person has contravened one of the provisions of the Australian Consumer Law specified in section 134A.
An infringement notice issued pursuant to section 134A will specify a pecuniary penalty that must be paid for the purported breach of the Australian Consumer Law. The maximum penalties that may be imposed by an infringement notice vary according to the particular provision said to have been breached. If a person issued with an infringement notice pays the specified penalty within 28 days (which may be extended by the ACCC), then that payment may not be taken as an admission of breach, and no further penalty (civil or criminal) may be sought from that person in respect of the breach.
There are numerous examples of the ACCC seeking and obtaining civil penalties in respect of breaches of the Australian Consumer Law. The most recent example of a civil penalty for breach of product safety provisions of the Australian Consumer Law occurred in February 2016, when a large Australian retailer was ordered by the Federal Court of Australia to pay a penalty of AUD3.057 million in respect of false or misleading representations about the safety of five consumer products as well as breaches of the obligation to report serious injuries.
There are more recent examples of civil penalties being imposed in relation to breaches of the Australian Consumer Law that did not relate to product safety. For example:
Examples of criminal prosecutions are much rarer. As far as is known, there are no recent examples of criminal prosecutions at a federal level relating to product safety issues.
On the other hand, the use of infringement notices is quite common, with two infringement notices being issued in the first quarter of 2019 in relation to product safety issues. The ACCC publishes a register of such notices, which identifies the person who is the subject of the notice and the provisions of the Australian Consumer Law that are said to have been breached. However, the register does not disclose the particular products or conduct to which the notice relates.
Liability for a faulty or defective product that causes injury, loss or damage may be brought on a number of grounds. The causes of action most commonly pleaded are the common law tort of negligence or a breach of the Australian Consumer Law. The Australian Consumer Law creates a number of bases for liability, including:
At common law, a manufacturer or supplier of products owes a duty of care to both purchaser and user to take reasonable steps to protect them from any foreseeable injury when using a product as it was intended.
The content of the duty owed by a particular manufacturer or supplier will depend upon the role they play in the supply chain and the steps which are reasonably and practicably available to them to address the risk.
False, Misleading or Deceptive Conduct
The Australian Consumer Law prohibits persons from engaging in false, misleading or deceptive conduct in trade or commerce. It does not matter whether the person intended to mislead. Breach of this prohibition gives rise to a right to sue for loss or damage (although not for personal injury) in respect of losses suffered because of that conduct.
This prohibition is relied on in all manner of claims, including product liability claims for economic loss. For example, if goods are represented – expressly or impliedly – to have certain qualities that they do not have, a purchaser or end user of the product may sue for damages on the basis that the representations are misleading.
Part 3-2 Division 1 of the Australian Consumer Law provides that a supplier of goods to a consumer supplies those goods subject to a number of statutory guarantees that cannot be limited or excluded by contract. Those guarantees include guarantees that the goods:
Remedies for breach of the above consumer guarantees are provided in Part 5-4 of the Australian Consumer Law. For actions against suppliers, consumers have a number of remedies available, including in some cases the right to return the goods and demand a refund, as well as the right to recover any reasonably foreseeable losses suffered by reason of the failure of the goods to comply with the guarantee.
Part 5-4 also provides an extended right to sue the manufacturer of goods for damages if they breach the guarantee of acceptable quality.
Strict Liability Regime
Part 3-5 of the Australian Consumer Law imposes liability on manufacturers of goods with safety defects. It is closely modelled on the European Product Liability Directive.
Goods have a safety defect if their safety is "not such as persons generally are entitled to expect". If such goods cause personal injury or damage to property, land or fixtures, persons who suffer loss as a result of such injury or damage may sue the manufacturer for damages.
Expanded Concepts of Consumer and Manufacturer under the Australian Consumer Law
There are specific definitions of "consumer" and "consumer goods" as well as "manufacturer" in the Australian Consumer Law.
"Consumer goods" or "goods acquired as a consumer" are goods that:
"Manufacturer" means not only the actual manufacturer of goods, but also:
Another cause of action for a person who has been injured or suffered loss or damage is under the law of contract. However, the number of these claims has diminished due to the growth of statutory remedies and remedies under the law of negligence.
Under the Australian regime, the original purchaser is not the only person who may make a claim for injuries caused by a product. Apart from the remedies available for breach of the consumer guarantees, which may only be sought by the consumer who received the goods from the supplier, the other causes of action outlined above may be relied upon by any person who suffers loss and damage that is compensable under the relevant cause of action.
The limitation period for bringing a product liability claim will depend on a number of factors, including the cause of action, the type of claim (for example, in relation to an alleged safety defect), whether the claim is brought under common law or statute, the relevant Australian jurisdiction, and the date of the alleged act or omission.
However, in relation to claims for personal injury, the applicable limitation period for an action to be commenced is:
There may also be a mechanism for an extension to be granted by the courts in relation to the applicable limitation period for personal injury claims. In determining whether to grant an extension, a court is generally required to consider a number of factors, including having regard to the justice of the case. Again, in most jurisdictions an extension of up to three years can be granted. There are also circumstances in which limitation periods are suspended, such as where a claimant is suffering from a legal incapacity (for example, the claimant is a minor or suffers from a mental or physical disability).
The limitation period for claims that do not relate to personal injury is, in most cases, six years from when the cause of action accrued.
Australia has both a federal court system and a hierarchy of courts in each of the states and territories. The High Court of Australia deals with constitutional disputes and appeals from either the Full Federal Court or a state or territory Court of Appeal. Both federal and state courts may exercise jurisdiction in respect of the causes of action under the Australian Consumer Law outlined above. Insofar as a claim relates to defendants and conduct within Australia, proceedings may be commenced in any court of competent jurisdiction, regardless of where the conduct occurred. However, there is cross-vesting legislation which provides that the proceedings may be moved from one court to another if they are in a clearly inappropriate forum.
The Australian Consumer Law also regulates the conduct of foreign corporations carrying on business in Australia. In order for an Australian court to validly exercise jurisdiction over a foreign corporation, the defendant must be validly served with initiating process. This requires an Australian court to be satisfied that the claim has a sufficient nexus to Australia to justify it being brought in Australia. The court rules in each jurisdiction set out a list of circumstances in which service outside of Australia may be authorised. One such circumstance is that the claim is seeking recovery of damage suffered wholly or partly in Australia, and that is often sufficient in product liability claims to justify service on a foreign defendant.
Australia is party to the Hague Convention on the Service Abroad of Judicial and Extrajudicial Documents in Civil or Commercial Matters, 1965 so, if authorised, service may be effected through Hague Convention means on other treaty parties.
There are mandatory steps that must be taken at a federal level and in some and states and territories in Australia before formal proceedings can be commenced in relation to product liability claims. Federal legislation obliges parties to take ‘genuine steps’ to resolve a dispute before commencing proceedings in the Federal Court. Under the federal legislation, genuine steps include the requirement to file a statement specifying the steps that have been taken to resolve the issues in dispute, or the reasons why such steps were taken.
Many states and territories also have various different pre-action procedures in place, which must be undertaken before formal proceedings can be commenced. For example, the Australian Capital Territory (ACT) requires the claimant of a personal injury claim to provide a potential respondent with a notice of their claim (in the approved form), which includes brief particulars and copies of any documents directly relevant to a matter in issue in the claim. The respondent must respond to the notice of claim, acknowledging whether it is in fact the proper respondent to claim or whether it has knowledge of who may be the proper respondent to the claim. If the respondent on whom the notice of claim was served is the proper respondent to the claim, they have an obligation to provide the claimant with copies of all documents in its possession that are directly relevant to a matter in issue in the claim. There is then an obligation on the respondent to attempt to resolve the dispute by making an offer of settlement or counter offer to any offer made by the claimant. Queensland has a very similar pre-action procedure provided for by the Personal Injuries Proceedings Act 2002 (QLD), except that, in addition to the obligations of the parties outlined above for the ACT, parties in Queensland must also attend a compulsory settlement conference before formal proceedings are commenced. South Australia also has pre-action procedures which the parties are required to comply with before commencing formal proceedings in relation to most claims.
Non-compliance with the various pre-action procedures may mean that the claimants cannot commence or continue proceedings until the pre-action requirements have been complied with. Furthermore, non-compliance may result in the court awarding costs reasonably incurred because of the non-compliance, against the non-complying party, once proceedings are commenced.
The general rule is that documents must be preserved as soon as there is a reasonable anticipation or reasonable contemplation of litigation. The definitions of document are extremely broad and extend to information in many forms, and to the product itself. The rule first existed at common law, where it is expressed as an offence against perverting the course of justice. In most Australian jurisdictions, the common law offence has now been supplemented or replaced by statute. For example:
Depending upon the jurisdiction, penalties include up to five years' imprisonment, significant fines and the ability of the court to strike out affected parts of the defence of a contravening party. Lawyers who advise their clients to act contrary to the obligations in legislation may also face action.
From a procedural perspective, if documents that were relevant to litigation are no longer available because of steps taken by a party who was aware of, or should have been aware of, actual or likely proceedings, that may result in that party's claim or defence being struck out, to the extent that the documents would have been relevant to that claim. It may also result in adverse inferences being drawn against the party about the content of the documents, which can then be used as a basis to make findings of fact against the party.
The rules of the court in which a claim is commenced outline the applicable requirements with respect to discovery. While these rules are similar across the various Australian jurisdictions, there are nuances between the Courts. To assist the parties, the Australian courts have published practice notes and directions that provide further guidance, such as in relation to the court's expectations with respect to the parties' approach to discovery. Use of technology is actively encouraged.
Generally speaking, the practice of Australian courts is to try to actively manage the discovery process so as to keep the level of discovery proportionate to the complexity of the issues in proceedings and the amount that is at stake.
In personal injury proceedings, in most courts, documentary discovery is only available with the court’s leave. Before making discovery orders, a court must be satisfied that the discovery sought is necessary and will assist the resolution of proceedings as quickly and efficiently as possible. Courts will generally not grant discovery requests that are expansive. The additional guidance provided by Australian courts via practice notes and directions emphasises the courts' expectation that parties to proceedings will take all steps necessary to reduce the burden of discovery.
Subpoenas may also be used to obtain documents that are relevant to issues raised in a proceeding. Like discovery, in many courts a party must approach the court to request leave to issue a subpoena, and must demonstrate to the court that the subpoena has a legitimate forensic purpose.
Expert evidence is typically an important part of the evidence in product liability cases, in respect of questions of both liability and quantum. Experts must be independent, and have a duty to assist the court rather than to advocate on behalf of the party that calls them. While powers do exist for courts to appoint their own experts, it is rarely done in product liability cases.
The duties of expert witnesses are usually set out in the court rules or practice notes (in addition to the common law). For example, the Federal Court of Australia's Expert Evidence Practice Note (GPN-EXPT) states that any expert witness retained by a party for the purpose of preparing a report or giving evidence should, at the earliest opportunity, be provided with a copy of the Practice Note and all relevant information (whether helpful or harmful to that party's case) so as to enable them to prepare a report of a truly independent nature. Experts must also set out the basis for their opinions, and acknowledge that they have complied with their obligations under the Practice Note.
Most courts also have rules that prohibit the evidence of any expert from being relied on unless the expert has served a written report well before the date for trial.
In addition, product liability cases often involve a court-ordered process for the evidence of experts in the same field to be given concurrently – ie, the experts for all parties in the same discipline will be sworn in together to give their evidence. It is also usual for a conferral process to be ordered in advance of the experts giving evidence so that they can produce a joint report which details the areas of agreement and disagreement, and the reasons for that disagreement.
Under the law of contract, negligence and the majority of provisions in the ACL, the claimant bears the onus of proving the elements of their claim on the balance of probabilities.
Claimants may bring product liability claims in either the Federal Court or the State or Territory Courts. Each state and territory has either two or three levels of court: a magistrates or local court, a district or county court and a Supreme Court. There are jurisdictional limits for lower courts, which vary from state to state (they are usually in the range of AUD750,000 to AUD1 million for the district courts). The Supreme Court of each state and territory has unlimited jurisdiction (subject only to other laws that may separately restrict the quantum of damages payable for certain types of claims, including personal injury claims). Most product liability litigation of any complexity will be brought in either a state or territory Supreme Court or the Federal Court.
Civil juries are very rare in Australia, so most product liability cases are heard by a judge alone. The usual practice in Australia is for a single judge to sit at first instance and a panel of three judges at appellate level.
All civil litigation in Australia is adversarial in nature. Individual parties present their evidence to the judge and make submissions on the law. After consideration of all the materials presented, the judge makes findings of fact and law.
In virtually all jurisdictions, unsuccessful parties have the right to appeal a judgment of a trial judge. The applicable appeal procedure is dictated by the jurisdiction in which the trial took place. In the case of interlocutory judgments, it is generally necessary for the unsuccessful party to apply for leave to appeal. Appeals are typically raised on a particular question of law, but it is not unusual for some of the evidence presented at trial to be reviewed in the course of an appeal.
Parties who are unsuccessful on appeal to the Full Federal Court or a state or territory court of appeal may seek leave to appeal to the High Court, Australia's highest appellate court. There is no automatic right to have an appeal heard by the High Court. The party wanting to appeal must convince the court in a preliminary hearing that the issues in dispute are sufficiently important or that the potential for miscarriage of justice is sufficiently great to justify the appeal to be heard. Once a matter has been determined by the High Court there is no further appeal, and the decision is binding on all other courts Australian courts.
Appeals in most Australian courts are by way of rehearing, meaning that the court has the power to consider all of the evidence anew. However, no new evidence may be put before the appellate court unless that court grants leave. It is extremely rare for such leave to be granted.
In the Full Federal Court, appeals from final judgments must be filed and served within 28 days (recently increased from 21 days) of the trial decision. Timeframes for state and territory courts of appeal vary based on jurisdiction but are all of a similar order.
The following defences may be available to a claim in negligence:
Voluntary assumption of risk is when a plaintiff consciously decides to take responsibility for injury, loss or damage. In establishing this defence, the defendant must show that the plaintiff properly perceived and appreciated the danger, and voluntarily chose to accept the risk. Contributory negligence may be relied upon when the plaintiff has contributed to their own injury by failing to meet the standard of care for their own safety. Typically, contributory negligence will result in apportionment of damages according to the degree of fault, but may be a complete defence in some jurisdictions. The learned intermediary defence has not yet been applied in Australian courts, but the existing common law principles would accommodate its use.
Some states have additional specific statutory defences relating to certain types of claims. For example, the state of New South Wales has introduced complete defences where:
Australian Consumer Law
In cases where a safety defect was not discoverable within the limitations of science and technology at the time of distribution, the manufacturer or supplier may rely on the ‘state of the art defence’, also known as the ‘development risk defence’. To do so, the defence must be established on the balance of probabilities, and the claim in question must be in relation to the Australian Consumer Law provisions relating to defective products.
Another defence to an action based on a safety defect may be claimed in circumstances where the defect is brought about by compliance with a mandatory standard. A mandatory standard is a standard for goods or anything relating to the goods which, under law, must be complied with when goods are supplied, and which carries a penalty for non-compliance. This defence cannot be claimed in relation to statutory requirements for goods to achieve a minimum standard.
Manufacturers are also entitled to claim a defence where the defect alleged did not exist when the goods were supplied by the manufacturer. Similarly, if an entity is only responsible for the manufacture of a component of the product, that entity will be able to claim a defence against actions for claims relating to safety defects in the finished product.
Adherence to regulatory requirements is a relevant consideration in product liability cases in Australia, although it does not operate as a complete defence to such claims. In this respect, please see 2.12 Defences to Product Liability Claims, above. There is no "pre-emption" defence in Australia. Compliance with applicable regulatory requirements or mandated standards will be a relevant factor considered by the courts in actions for negligence and under the statutory warranty or guarantee provisions of the Australian Consumer Law, but the fact that a product had its safety assessed by a regulator as part of a process of granting a licence to sell that product in Australia does not preclude a product liability claim being brought in respect of it.
Australia has a loser pays costs system. The precise rules that apply to calculate the costs payable by an unsuccessful party to a successful one vary from jurisdiction to jurisdiction, but are generally calculated on a party/party basis, which means that only some parts of the work undertaken are recoverable (meaning that in the ordinary course the costs recovered are only a portion of the costs incurred). However, solicitor/client or indemnity costs, which would be close to the total costs incurred, may be awarded in some circumstances, particularly if a party rejected a settlement offer and then failed to do better at trial.
The approach taken to calculating costs differs from jurisdiction to jurisdiction. Some jurisdictions have a scale of costs, which specifies (and limits) the amount a successful party may recover from the unsuccessful party for tasks undertaken during the course of litigation (such as the drafting of correspondence or electronic document management). Other recoverable costs include court filing fees and other out-of-pocket expenses. In other jurisdictions, an assessment is made as to the reasonableness of the costs incurred.
Depending on the type of proceeding commenced, more particular rules may apply in relation to costs. For example, in representative proceedings or class actions, statutory provisions restrict costs orders being made against class members, other than those who commenced the proceedings.
Australia has a well-established litigation funding industry. The recent Australian Law Reform Commission Report in relation to Class Action Proceedings and Litigation Funding, dated December 2018, identified 33 litigation funders operating in either the United Kingdom or Australia or both, together with a further 15 entities that had registered with the Australian Securities and Investments Commission, but did not appear to be active in Australia as yet.
Litigation funding arrangements typically involve a funding agreement between the funder and claimant, a retainer agreement between the lawyer and claimant, and an agreement between the litigation funder and lawyer, which sets out the terms on which the funder agrees to pay the costs of the litigation. However, the models of litigation funding are evolving.
At the core of such litigation funding arrangements is an arrangement whereby the litigation funder promises to pay the legal costs and disbursements of the litigation, and to meet any adverse costs order, in exchange for which the claimant promises to pay the funder a percentage of any compensation they receive.
Such arrangements are very common in Australian class actions, although less common in product liability class actions than in other forms of class actions.
Australian lawyers are permitted to enter into "no win no fee" arrangements and, in the case of such arrangements, to charge an uplift on their fees of up to 25% in the event of success. They are not otherwise permitted to charge contingency fees. However, there is currently a law reform proposal which, if adopted, would permit lawyers to enter into arrangements for percentage-based success fees in class actions (see further 3.1 Trends in Product Liability and Product Safety Policy, below).
There are four Australian courts that have a class action procedure (referred to as a representative proceeding): the Federal Court of Australia and the Supreme Courts of New South Wales, Queensland and Victoria. The class action procedure is often used in product liability claims.
The rules governing representative proceedings are almost identical in each of the four jurisdictions. In order to bring representative proceedings, there must be seven or more persons who have claims against the same person, arising out of the same, similar or related circumstances and giving rise to a substantial common issue of law or fact. However, it is not necessary for at least seven persons to be individually identified, nor is there are requirement, as in many other jurisdictions, that the common issues predominate over those which are not common.
Australian representative proceedings are "opt out", meaning that all persons who fall within the group definition will be bound by the outcome of the proceedings unless they choose to opt out. Unlike many other jurisdictions, there is no certification requirement for Australian class actions, meaning that once a class action that meets the basic requirements is commenced, a class action is on foot unless the defendants can convince the court that representative proceedings are an inappropriate vehicle for the dispute in question.
In recent years, Australia has seen a number of class actions concerning product liability claims. A selection of those cases is included below.
ASR Hip Replacement Class Action
In 2011, an action was jointly brought by Shine Lawyers and Maurice Blackburn Lawyers on behalf of Australians implanted with the defective ASR hip device, after a worldwide recall was announced. In March 2016, the parties reached a conditional agreement to settle the class action for AUD250 million, an agreement that was subsequently approved by the Federal Court.
Alucobond Combustible Cladding Class Action
More recently, a class action has been filed by William Roberts Lawyers, funded by IMF Bentham, which seeks to represent owners of buildings who have suffered or will suffer financial loss due to the need to remove and replace Alucobond PE highly combustible cladding products. The claimants seek to recover the cost of rectification, loss of property value and the legal cost of experts from the product manufacturers.
Mesh Implant Class Action
In 2012, a representative proceeding was commenced by Shine Lawyers on behalf of Australian women who allege injuries as a result of implanted pelvic mesh implants. The first instance trial in the pelvic mesh class action was held in the Federal Court of Australia in 2017. Judgment is reserved.
In addition, there have been a number of highly contentious toxic tort class actions relating to bushfires and floods, some of which resulted in significant multimillion-dollar settlements.
Separately, the ACCC has also been active in recent years, particularly in its oversight of product recalls and allegedly unsafe products.
The maximum penalties for breach of the Australian Consumer Law set out in 1.5 Penalties for Breach of Product Safety Obligations, above, were introduced as a result of amendments that took effect on 1 September 2018 and substantially increase the penalties previously available (the previous maximum corporate penalty for a breach of the Australian Consumer Law was AUD1.1 million), introduce for the first time in relation to product safety breaches the potential for penalties linked to benefit from either the breach or corporate turnover.
Even before the introduction of these amendments, the penalties being imposed by courts for breaches of the Competition and Consumer Act (including but not limited to those relating to product safety breaches) were steadily increasing. This trend is expected to continue following the introduction of the new penalty regime (which has yet to be tested), and indeed, once cases commenced under the new penalty regime come before the court, there will likely be a sharp increase in the penalties being imposed.
In relation to product liability, the current product liability regime remains relatively unchanged since its introduction in 2011 as part of the Australian Consumer Law. However, class actions are now a significant driver of a number of different forms of litigation, including product liability litigation, and there are a number of developments in relation to class action procedure which are presently attracting attention. These include the question of whether Australian courts have the power to make a common fund order in class action litigation (this question will be considered by the High Court of Australia in the next 12 months), and questions of how the court should manage competing class actions commenced by different law firms in respect of the same subject matter. Consideration of these issues is taking place against the backdrop of a report by the Australian Law Reform Commission in relation to class action proceedings and litigation funders, which was published on 24 January 2019 and makes a number of significant proposals for legislative reform.
In March 2017, Consumer Affairs Australia and New Zealand published the report of its review of the Australian Consumer Law. The report made a number of recommendations in relation to amendment of the Australian Consumer Law, some of which (for example, the increased penalties described in 3.1 Trends in Product Liability and Product Safety Policy) have already been implemented. However, one recommendation that has not been implemented is the recommendation that Australia should introduce a general safety provision that imposes an obligation on suppliers in Australia to ensure the safety of a product before it enters the market, and impose penalties on suppliers in accordance with the new penalty regime for failing to do so.
The ACCC is actively promoting this recommendation. In March 2019, the Chairman of the ACCC delivered a speech in which he advocated for the introduction of the general safety obligation. At the same time, the Minister responsible for the ACCC indicated that Consumer Affairs Australia and New Zealand was drafting a consultation regulatory impact statement in respect of such a proposal.
From a product liability perspective, much will depend upon the manner in which the Australian Law Reform Commission's recommendations in relation to class actions are implemented. They include, for example, a proposal that Australian lawyers ought to be able to charge true percentage-based success fees in class action proceedings.
If given effect, each of these changes will fundamentally change the product safety and product liability landscape in Australia.